DTF Station Warm Peel DTF Film Rolls

24" Film Rolls are discounted by 50% and in limited supply! Take advantage of this deal while supplies last!

Check out this guide on making your own costumes using this DTF film!

Features:

1. High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
2. Warm Peel: Peel off the film without a long wait after the first press.
3. Single Side Matte: Easily distinguish the print side.

Compatible with:

• Any DTF printer on the market - **Recommended use with a roll printer**
• Looking for DTF film sheets instead? Go here.

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
   Option 1: Wait for 4-6 seconds and remove the film gently
   Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

WARNING

• Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.