on eligible orders over $150
on eligible orders over $150
A7 is a 2.375" round silicone printing pad and is approximately 40 durometer.
Use Si-Tech Gel with Fixture Putty to create a mold for pad printing. Once the gel has been worked into the putty a mold can be made, as the putty ...View full details
All American 90 - 120mm Replacement Ink Cup & Ceramic Ring for your pad printer. You may also need: Ink Cup Screw & Ink Cup Knob Assembly ...View full details
AWP Waterproof Inkjet Film produces high-resolution positives for screen printing without a darkroom, processor, or chemicals. The film is 0.004 th...View full details
The SPC-100 is a 1 color manual pad printer with 90mm ceramic ring closed ink cup. The printable area is 100mm (3.1") diameter. Compact and easy-to...View full details
The SPC-814E is a 1-color automatic pad printer. The machine has a closed cup system with an ink cup of 3.5" (90mm) and a maximum printing of 3.1" ...View full details
The B-2 is a 3" x 1.25" rectangular silicone printing pad that has an approximate durometer of 40.
WS43 is a steel-backed, photo polymer nylon coated, water wash pad printing plate. The total thickness of the plate is .43mm. The WS-43 is easy to...View full details
The 218M is the pad of choice for several major garment manufacturers that print tagless underwear. While the 218M pad is usually available in only...View full details
1" x 2" rectangle silicone printing pad. Approximately 40 durometer. Use the C8 small 2.1"L x 1.1"H x.4" strip pad to print in smalls, hard to reac...View full details
TPV Thinner is for use with Marabu Tampa series screen and pad print inks. To regulate ink viscosity, add 10-20% of TPV Thinner to the ink and stir...View full details
TPR Tampastar is a Class VI certified medical grade pad printing ink. Glossy Ink system: solvent-based, 1 or 2 component Very fast drying Resistan...View full details
GLH Hardener is recommended for use with Marabu Glass GL Inks only. Add hardener to the ink immediately before printing: 1 part of hardener to 20 p...View full details
Want to start pad printing right away? The SPC-100 manual pad printing package has everything you need to jumpstart your pad printing business. Th...View full details
TPU is suited for materials that are traditionally difficult to print on such as metals, plastics and varnished surfaces. High gloss Ink system: ...View full details
The Anti-static Paste AP is an ink additive that reduces ink sensitivity to electrostatic charge. Adding AP paste also thins the ink and decreases ...View full details
H2 Hardener is a fast drying ink hardener that produces a hard, brittle ink film and causes yellowing of the ink upon UV exposure. The change in co...View full details
Ink cup screw for use with All American Pad Printers & Ceramic Ink Cups. You may also be interested in the Ink Knob Assembly.
Opaquing Paste OP 170 increases the opacity and broadens the spectrum when matching color shades or printing onto colored or dark substrates. OP is...View full details
UKV-1 Thinner is for use with Marabu pad print and screen print inks. UKV-1 Thinner is for use with Marabu pad printing and screen printing inks. ...View full details
TPR Tampastar Technical Data Sheet With its particularly high resistance, TampaStar TPR can be used for products subject to high mechanical stress ...View full details
A long shaft pad holder that is used with all automatic All American pad printers. However, this long shaft is not for use with manual pad printers...View full details