Products

Graphtec 25' 25-25 Pin Serial RS-232-C Cable 56040-006

Ballpoint Pen Adapter for Graphtec CE Lite-50 Ballpoint pen adapter diameter 8 - 11.3 mm. for Graphtec CE Lite-50.

Graphtec Black Ballpoint Pen, 10 Pens/PK KB700-BK Oil based pen 0.7 point (KB700-BK), 10 pens/pack Compatible with: Graphtec PHP34-BALL pen holder ...

Graphtec Blade Holder 0.9MM Blue Top, Black Abs Tip for CB09UA Blades (PHP32-CB09N-HS)

Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip for CB15 blades. These brass ...

Graphtec Blade Holder CB15 Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip fo...

Graphtec Blade Set for CE LITE-50 Graphtec standard or long blade set for the CE-Lite-50 vinyl cutter. Replaces the original blade set that came wi...

Graphtec Carrier Sheets (13.7"x 20.7") for CE LITE-50  Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area. This carrier sheet c...

The Graphtec CE6000 Supersteel Blade delivers superior cutting performance with its 0.9mm diameter and 45° angle, enabling precise cuts in a variet...

Graphtec CE6000 BLADES (CB15U) is angled at 45° Diameter 1.5mm Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (lamin...

Graphtec Supersteel 60° 1.5mm Blades for PHP32/33/35-CB15N-HS bladeholder

The Graphtec High Intensity Supersteel Blades 45° - 1.5mm are perfect for cutting high-intensity reflective films and other harder films. The preci...

Graphtec Supersteel Blades are angled 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 0.5 mm thick. And also small detailed...

Compatible with blades: CB09UB, CB09UB-K600.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION: If you are using CB09...

Graphtec CE6000 Blade Holders Ballpoint pen holder for black, oil-based pen (KB700-BK).

Graphtec CE6000 Blade Holders FIBERSTEADTLERF Lumocolor holder.

Graphtec Cross Bar 621831414 for FC9000-160 Compatible With: Graphtec FC9000 Vinyl Cutting Plotter

Graphtec Cross-Cutting Blade for CE Lite 50 Cross cutter or manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter compatible with G...

Graphtec Cutting Mat for CE LITE-50 Cutting Mat for Graphtec CE Lite-50 for replacement.

Cutting Mat for Graphtec CE Lite-50 for replacement.

Graphtec Elastic Cord for CE6000 (Anti-Static Strips) Replacement PTFE Cut Strip for Graphtec CE6000.

STAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high quality FINE POINT 0.4mm TIP. Used for plotting...

Graphtec PTFE Cutting Mat Replacement for CE6000-40 Genuine replacement PTFE cutting mat for the CE6000 Series of Graphtec cutting plotters. Compa...

Compatible with Graphtec FC and CE Series. ~15mm diameter (including rubber wheel) ~12mm diameter (not including rubber wheel) ~4mm diameter opening

Graphtec Set of 4 Magnets with Antistatic Elastic Cord Set of 4 Magnets to be used with Antistatic Elastic Cord Set for Graphtec CE6000.

Sharpie holder with a metal sleeve that can be used on Graphtec FC, FCX and CE series. This is a specialty SHARPIE PEN HOLDER for use such as in th...

Cross Cutter Standard blade for FC Series

Reusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet. This cuttin...

Use this 60° 0.9mm Supersteel Blade to cut window tint and other thin films. Made for PHP32-CB09N-HS Grahtec blade holder.

Cross Cutter Supersteel Blade for FC Series

Lead Time: Expect extended lead time. Estimated mid-2024.* *All lead times are subject to change. Essentialware’s Gray Silicone Foam Heat Con...

Check out our blog article on the power of a platen and its various uses in any garment printing pipeline!

Heat Resistant Tape, No Residue , for Heat Transfer Vinyl, and Sublimation Transfer

Printable: DTG, Laser Toner Transfer, Vinyl, Screen Printing, and Pad Printing. 100% Ringspun Cotton 4.3oz Jersey, 2 Ply Soft and Breathable Was...

HD FLOOR RACK The Ultimate Organizer for any shop Powder coated silver vein (black) finish Easy to assemble Holds 44 12 to 30 Media rolls Measures ...