Products

Graphtec Cross Bar 621831414 for FC9000-160 Compatible With: Graphtec FC9000 Vinyl Cutting Plotter

Graphtec Cross-Cutting Blade for CE Lite 50 Cross cutter or manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter compatible with G...

Graphtec Cutting Mat for CE LITE-50 Cutting Mat for Graphtec CE Lite-50 for replacement.

Cutting Mat for Graphtec CE Lite-50 for replacement.

Graphtec Elastic Cord for CE6000 (Anti-Static Strips) Replacement PTFE Cut Strip for Graphtec CE6000.

STAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high quality FINE POINT 0.4mm TIP. Used for plotting...

Graphtec PTFE Cutting Mat Replacement for CE6000-40 Genuine replacement PTFE cutting mat for the CE6000 Series of Graphtec cutting plotters. Compa...

Compatible with Graphtec FC and CE Series. ~15mm diameter (including rubber wheel) ~12mm diameter (not including rubber wheel) ~4mm diameter opening

Graphtec Set of 4 Magnets with Antistatic Elastic Cord Set of 4 Magnets to be used with Antistatic Elastic Cord Set for Graphtec CE6000.

Sharpie holder with a metal sleeve that can be used on Graphtec FC, FCX and CE series. This is a specialty SHARPIE PEN HOLDER for use such as in th...

Cross Cutter Standard blade for FC Series

Reusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet. This cuttin...

Use this 60° 0.9mm Supersteel Blade to cut window tint and other thin films. Made for PHP32-CB09N-HS Grahtec blade holder.

Cross Cutter Supersteel Blade for FC Series

Lead Time: Expect extended lead time. Estimated mid-2024.* *All lead times are subject to change. Essentialware’s Gray Silicone Foam Heat Con...

Check out our blog article on the power of a platen and its various uses in any garment printing pipeline!

Heat Resistant Tape, No Residue , for Heat Transfer Vinyl, and Sublimation Transfer

Printable: DTG, Laser Toner Transfer, Vinyl, Screen Printing, and Pad Printing. 100% Ringspun Cotton 4.3oz Jersey, 2 Ply Soft and Breathable Was...

HD FLOOR RACK The Ultimate Organizer for any shop Powder coated silver vein (black) finish Easy to assemble Holds 44 12 to 30 Media rolls Measures ...

15" x 15" x 3/8" thick pad replacement kit consists of pad, adhesive, adhesive spread tool, sheet of #40 sandpaper, alcohol prep pad, and single ed...

For straight walled large circumference substrates with or without a handle such as ceramic cat bowls.  Diameter: 6" Height: 2.5"

For small tapered substrates with or without a handle such as small shot glasses. Base Diameter: 1.4" Top Diameter: 1.93" Height: 2.3"

For straight walled large circumference substrates with or without a handle such as ceramic dog bowls. Diameter: 7.5" Height: 3"

For straight walled substrates with or without a handle such as standard ceramic 11 and 15 oz mugs or 14 oz travel mugs. Diameter: 3 3/8" Heigh...

For tapered substrates with or without a handle such as standard ceramic 12 oz latte mugs. Base Diameter: 2 1/2" Top Diameter: 3.6" Height: 4"

HIX 6" Tapered Sublimation Oven 17 oz. Latte Cup Wrap The HIX SNAP WRAPS is a patented, tool-less, sublimation oven wrap solution for your custom d...

For straight walled substrates with or without a handle such as water bottles and thermal tumblers. Base Diameter: 2.8" Top Diameter: 2.8" Heig...

Rubber Pad Replacement Kit 9" x 12"x 1/4"

Hix Air Filter (fits 680 and 880) replacement part. Compatible with: Hix N-880 Hix N-680

Attachment for the B-250 cap transfer machine. Keeps transfers from sticking. Helps hold transfers, letters, or numbers onto caps before transferri...

Using the proper size platen will prevent caps from being stretched or wrinkled on platens that are the wrong size.All HIX cap presses come standar...