Skip to content
Walk-In Customers: We are only accepting credit/debt cards (no cash transactions) at this time.
Walk-In Customers: We are only accepting credit/debt cards (no cash transactions) at this time.
Color Prime DTF Station Hot Melt Powder White 1 kg

Color Prime Hot Melt Powder for Direct to Film

by DTF Station
$32.99
SKU DTFS-CP-P-1KG

Hot Melt Powder Material Safety Data Sheet

Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

Features:

  • After baking the powder, solid white for more vibrant colors
  • Even and regular particles for quality graphics and good adherence

Sizes:

  • White: 1 kg, 20 kg
  • Black: 1 kg

Instructions (for use with DTF Station Warm Peel film):

  1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
  3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
  4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
  5. After the first press,
    Option 1: Wait for 4-6 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.


    WARNING

    • Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.
    • For DTG printers, powder should NOT be applied on the platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

    Ecofreen Oeko-Tex Certificate

    NOTE

    • DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
    • Color Prime hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
    • The designed fabrics or printed shirts have a good wash characteristics.
    • The fabric has very slight hand feel touch.
    • The process is much faster than Vinyl printing (Vinyl Printer).