Products

Ballpoint Pen Adapter for Graphtec CE Lite-50 Ballpoint pen adapter diameter 8 - 11.3 mm. for Graphtec CE Lite-50.

Graphtec Blade Holder 0.9MM Blue Top, Black Abs Tip for CB09UA Blades (PHP32-CB09N-HS)

Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip for CB15 blades. These brass ...

Graphtec Blade Holder CB15 Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip fo...

Graphtec Blade Set for CE LITE-50 Graphtec standard or long blade set for the CE-Lite-50 vinyl cutter. Replaces the original blade set that came wi...

Graphtec Carrier Sheets (13.7"x 20.7") for CE LITE-50  Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area. This carrier sheet c...

The Graphtec CE6000 Supersteel Blade delivers superior cutting performance with its 0.9mm diameter and 45° angle, enabling precise cuts in a variet...

Graphtec CE6000 BLADES (CB15U) is angled at 45° Diameter 1.5mm Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (lamin...

Graphtec Supersteel 60° 1.5mm Blades for PHP32/33/35-CB15N-HS bladeholder

The Graphtec High Intensity Supersteel Blades 45° - 1.5mm are perfect for cutting high-intensity reflective films and other harder films. The preci...

Graphtec Supersteel Blades are angled 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 0.5 mm thick. And also small detailed...

Compatible with blades: CB09UB, CB09UB-K600.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION: If you are using CB09...

Graphtec CE6000 Blade Holders Ballpoint pen holder for black, oil-based pen (KB700-BK).

Graphtec Cross Bar 621831414 for FC9000-160 Compatible With: Graphtec FC9000 Vinyl Cutting Plotter

Graphtec Cross-Cutting Blade for CE Lite 50 Cross cutter or manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter compatible with G...

Graphtec Cutting Mat for CE LITE-50 Cutting Mat for Graphtec CE Lite-50 for replacement.

Cutting Mat for Graphtec CE Lite-50 for replacement.

Graphtec Elastic Cord for CE6000 (Anti-Static Strips) Replacement PTFE Cut Strip for Graphtec CE6000.

Features: Datalink Barcode Unrivaled Print / Cut Accuracy Heavy Duty Cutting Contour and Die Cut Take-Up Reel The flagship FC9000 Series is Graph...

Graphtec PTFE Cutting Mat Replacement for CE6000-40 Genuine replacement PTFE cutting mat for the CE6000 Series of Graphtec cutting plotters. Compa...

Compatible with Graphtec FC and CE Series. ~15mm diameter (including rubber wheel) ~12mm diameter (not including rubber wheel) ~4mm diameter opening

Graphtec Set of 4 Magnets with Antistatic Elastic Cord Set of 4 Magnets to be used with Antistatic Elastic Cord Set for Graphtec CE6000.

Sharpie holder with a metal sleeve that can be used on Graphtec FC, FCX and CE series. This is a specialty SHARPIE PEN HOLDER for use such as in th...

Cross Cutter Standard blade for FC Series

Reusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet. This cuttin...

Use this 60° 0.9mm Supersteel Blade to cut window tint and other thin films. Made for PHP32-CB09N-HS Grahtec blade holder.

Cross Cutter Supersteel Blade for FC Series

The H-160A is is the perfect solution for your tagless label applications. The H-160A is a heavy duty, commercial grade, roll to roll heat press de...

The H-168 is a pneumatic stamping machine. The stamping temperature can be adjusted from room temperature to 280 °C / 535 ° Stamp preprinted foil ...

The H-190 is a manual stamping machine that doesn't require a compressor to operate. The stamping temperature can be adjusted from room temperature...

The H-200B is a pneumatic stamping machine with a 5.9” x 8.25” stamping area. The stamping temperature can be adjusted from room temperature to 400...

The H-200BS is a pneumatic flat and cylinder stamping machine with a 5.9"x8.5" stamping area. The stamping temperature can be adjusted from room te...

The H-250 is a pneumatic flat hot stamping machine with a 7"x9" stamping area. The temperature can be adjusted from room temp. to 535 ° F. Specific...

The H-250S is a pneumatic flat and cylinder hot stamping machine with a stamping area of 7″x9″. The stamping temperature can be adjusted from room ...

MOBILE RACK 2³ CORE Heavy Square Tube Construction for Excellent Durability Powder Coated Silver Vein (Black) Finish Heavy Duty Nylon Casters Hold...

Lead Time: Expect extended lead time. Estimated mid-2024.* *All lead times are subject to change. Essentialware’s Gray Silicone Foam Heat Con...

Check out our blog article on the power of a platen and its various uses in any garment printing pipeline!