Products

Absorbs light softer look, muted palette Pressure Sensitive Overlaminates Gfp Film Overlaminates - the critical final step in protecting and extend...

Gfp Matte Polymeric UV 4 Mil Vinyl Grey Adhesive Permanent Non-reflective surface absorbs light and eliminates glare for silky smooth colors Grey B...

Gfp Matte Polymeric UV 4 Mil Vinyl Clear Adhesive Removable Non-reflective surface absorbs light and eliminates glare for silky smooth colors Clear...

Gfp Matte Polymeric UV 4 Mil Vinyl Grey Adhesive Removable Non-reflective surface absorbs light and eliminates glare for silky smooth colors Grey B...

Gfp Matte2 mil BOPPNon-reflective to eliminate glare Linerless Polypropylene Film

Polyester + Adhesive0.5 + 2.5 Low Melt Adhesive 185° TO 195° F

Gfp Matte- Polymeric UV 4 Mil Vinyl - Clear Adhesive - Permanent Non-reflective surface absorbs light and eliminates glare for silky smooth colors

Non-Reflective to eliminate light glare Pressure Sensitive Over-Laminates

563TH-3, 363TH, 355TH, 263C, 255C, 230C & 44TH A.) Unpacking and assembly of the machine. Fine tuning calibration, if necessary, for roller nip...

Polyester + Adhesive0.5 + 2.5Low Melt Adhesive 185° TO 195° F

Crystalline surface to minimize glare UL 410 approved for floor graphics Pressure Sensitive Over-Laminates Gfp Film Overlaminates - the critical fi...

Crystalline surface with added rigidity UL 410 approved for floor graphics Pressure Sensitive Over-Laminates   Gfp Film Overlaminates - the critica...

Gfp White Mount 3 Mil White Polypropylene White carrier for added opacity Reduces color shift on Black Gatorboard Sensitive Mounting Adhesives

Graphics One GO Xpress C-1200 Calendar Quick FAQs   GO Xpress™ C-1200 Roll-to-Roll Calendar 47" 3-in-1 Graphics One initiated the development o...

Graphics One GO Xpress C-1700 Calendar Quick FAQs   GO Xpress™ C-1700 Roll-to-Roll Calendar 67" 3-in-1Graphics One initiated the development of...

Graphtec 25' 25-25 Pin Serial RS-232-C Cable 56040-006

Ballpoint Pen Adapter for Graphtec CE Lite-50 Ballpoint pen adapter diameter 8 - 11.3 mm. for Graphtec CE Lite-50.

Graphtec Black Ballpoint Pen, 10 Pens/PK KB700-BK Oil based pen 0.7 point (KB700-BK), 10 pens/pack Compatible with: Graphtec PHP34-BALL pen holder ...

Graphtec Blade Holder 0.9MM Blue Top, Black Abs Tip for CB09UA Blades (PHP32-CB09N-HS)

Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip for CB15 blades. These brass ...

Graphtec Blade Holder CB15 Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip fo...

Graphtec Blade Set for CE LITE-50 Graphtec standard or long blade set for the CE-Lite-50 vinyl cutter. Replaces the original blade set that came wi...

Graphtec Carrier Sheets (13.7"x 20.7") for CE LITE-50  Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area. This carrier sheet c...

The Graphtec CE6000 Supersteel Blade delivers superior cutting performance with its 0.9mm diameter and 45° angle, enabling precise cuts in a variet...

Graphtec CE6000 BLADES (CB15U) is angled at 45° Diameter 1.5mm Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (lamin...

Graphtec Supersteel 60° 1.5mm Blades for PHP32/33/35-CB15N-HS bladeholder

The Graphtec High Intensity Supersteel Blades 45° - 1.5mm are perfect for cutting high-intensity reflective films and other harder films. The preci...

Graphtec Supersteel Blades are angled 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 0.5 mm thick. And also small detailed...

Compatible with blades: CB09UB, CB09UB-K600.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION: If you are using CB09...

Graphtec CE6000 Blade Holders Ballpoint pen holder for black, oil-based pen (KB700-BK).

Graphtec CE6000 Blade Holders FIBERSTEADTLERF Lumocolor holder.

Graphtec Cross Bar 621831414 for FC9000-160 Compatible With: Graphtec FC9000 Vinyl Cutting Plotter

Graphtec Cross-Cutting Blade for CE Lite 50 Cross cutter or manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter compatible with G...

Graphtec Cutting Mat for CE LITE-50 Cutting Mat for Graphtec CE Lite-50 for replacement.

Cutting Mat for Graphtec CE Lite-50 for replacement.

Graphtec Elastic Cord for CE6000 (Anti-Static Strips) Replacement PTFE Cut Strip for Graphtec CE6000.

Features: Datalink Barcode Unrivaled Print / Cut Accuracy Heavy Duty Cutting Contour and Die Cut Take-Up Reel The flagship FC9000 Series is Graph...

STAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high quality FINE POINT 0.4mm TIP. Used for plotting...

Graphtec PTFE Cutting Mat Replacement for CE6000-40 Genuine replacement PTFE cutting mat for the CE6000 Series of Graphtec cutting plotters. Compa...