The compact size is ideal for use in any shop where limited amperage is a concern. The modular design allows for expandability to easily add chambers and conveyor length as production needs increase. The Lo-E is an ideal machine for a single DTG operating out of a home, or with expansion, larger shops will find it an effective production dryer.
At 3 minutes dwell time it cures up to 45 garments/hr* DTG printed with digital white ink. At only 1.5 minutes dwell time it cures up to 88 CMYK DTG garments/hr*, 88 pretreat-only garments/hr**, or 88 garments/hr* screen printed with water-based ink or discharge.
Drawing 22 amps at 230 volts, the dryer's two 24 in. (61 cm) wide by 18 in. (46 cm) deep high-efficiency infrared heaters provide 4,600 watts (4.6 kW) of power, maximizing curing capacity and in turn, minimizing energy costs per garment cured. Height-adjustable, the heaters offer dual zone temperature control.
A 370 CFM (10.5 m3/min.) exhaust system evacuates moisture and air contaminates from the heating chamber, and cools the enclosure's outer skin and control panel.
The 30 in. (76 cm) wide by 88 in. (224 cm) long conveyor runs true by means of a low friction belt aligner patented by the company, with belt speed controls allowing infinitely adjustable dwell times from 1 minute to five minutes.
Features:
- HEAVY DUTY: “X-Series” Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor
- ACCURATE: Dual digital PID Temperature controller is accurate to +/-1°F
- ADJUSTABLE: 3” - 7” (7.6 - 17.7 cm) belt-to-heater clearance, adjustable separately on each side for each heater
- EXHAUST: High powered exhaust to remove fumes and moisture
- CONSISTENT: Precision DC belt speed control w/ digital display
- EXPANDABLE: Add additional heat chambers and conveyor extensions
- EFFICIENT: Draws only 22 amps for highly efficient curing
Specifications:
Single Camber:
| Total Wattage | 4,600w (4.6kW) |
| Belt Width | 30” (76.2 cm) |
| Heater Width | 24” (61 cm) |
| Conveyor Length | 88” (224 cm) |
| Chamber Length | 35” (89 cm) |
| Powered Exhaust | 370 CFM (10.5 CMM) |
| Digital White Ink @ 3 min* | 45/hr |
| Digital White Ink @ 3.5 min* | 38/hr |
| Waterbased/Discharge @ 90 secs.* | 88/hr |
| * Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables. | |
Double Camber:
| Total Wattage | 8,100w (8.1kW) |
| Belt Width | 30” (76.2 cm) |
| Heater Width | 48” (61 cm) |
| Conveyor Length | 124” (224 cm) |
| Chamber Length | 35” (89 cm) |
| Powered Exhaust | 370 CFM (10.5 CMM) |
| Digital White Ink @ 3 min* | 90/hr |
| Digital White Ink @ 3.5 min* | 76/hr |
| Waterbased/Discharge @ 90 secs.* | 176/hr |
| * Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables. | |