A7 is a 2.375" round silicone printing pad and is approximately 40 durometer.

Use Si-Tech Gel with Fixture Putty to create a mold for pad printing. Once the gel has been worked into the putty a mold can be made, as the putty ...

All American 90 - 120mm Replacement Ink Cup & Ceramic Ring for your pad printer.  You may also need: Ink Cup Screw & Ink Cup Knob Assembly ...

The SPC-100 is a 1 color manual pad printer with 90mm ceramic ring closed ink cup. The printable area is 100mm (3.1") diameter. Compact and easy-to...

The SPC-814E is a 1-color automatic pad printer. The machine has a closed cup system with an ink cup of 3.5" (90mm) and a maximum printing of 3.1" ...

WS43 is a steel-backed, photo polymer nylon coated, water wash pad printing plate. The total thickness of the plate is .43mm. The WS-43 is easy to...

The B-2 is a 3" x 1.25" rectangular silicone printing pad that has an approximate durometer of 40.

GLH Hardener is recommended for use with Marabu Glass GL Inks only. Add hardener to the ink immediately before printing: 1 part of hardener to 20 p...

The 218M is the pad of choice for several major garment manufacturers that print tagless underwear. While the 218M pad is usually available in only...

1" x 2" rectangle silicone printing pad. Approximately 40 durometer. Use the C8 small 2.1"L x 1.1"H x.4" strip pad to print in smalls, hard to reac...

Want to start pad printing right away? The SPC-100 manual pad printing package has everything you need to jumpstart your pad printing business. Th...

H2 Hardener is a fast drying ink hardener that produces a hard, brittle ink film and causes yellowing of the ink upon UV exposure. The change in co...

The Anti-static Paste AP is an ink additive that reduces ink sensitivity to electrostatic charge. Adding AP paste also thins the ink and decreases ...

Ink cup screw for use with All American Pad Printers & Ceramic Ink Cups. You may also be interested in the Ink Knob Assembly.

Opaquing Paste OP 170 increases the opacity and broadens the spectrum when matching color shades or printing onto colored or dark substrates. OP is...

UKV-1 Thinner is for use with Marabu pad print and screen print inks. UKV-1 Thinner is for use with Marabu pad printing and screen printing inks. ...

Listing photo may not reflect the final color of the product. Please refer to the dropdown menu NOT the photo when selecting color. Tampa Tex TPX P...

P2 Primer is an ink adhesion promoter and is especially useful for printing onto PP (polypropylene) and PE (polyethylene), which must be pretreated...

A long shaft pad holder that is used with all automatic All American pad printers. However, this long shaft is not for use with manual pad printers...

A pad holder with a short shaft for use with all All American pad printers.

Marabu PSV Thinner

GLH Hardener is recommended for use with Marabu Glass GL Inks and the MGLH Hardener is recommended for use with Marabu Glass TPGL. Add hardener to ...

Nervous that you don't have all the supplies needed to start pad printing? Don't worry! The All American Pad Printing Supply Package has everything...

TPX Hardener  - Liter

SV1 Ink Retarder is used to modify the solvent evaporation rate in Marabu screen and pad print inks. SV-1 has good solubility and an evaporation ra...

Thinner for Marabu GL Glass ink for screen printing. To regulate ink viscosity, add about 10% of GLTPV Thinner to ink and stir until homogeneous. G...

200 LPI screen tint (90/10) 10% open area for the second exposure of pad print plates.

The SPC-125 is a 1-color manual pad printer with 110mm ceramic ring closed ink cup. This machine has a printable area of 100mm diameter. Compact an...

All American 90mm ~ 110mm replacement ceramic ring. All American 90mm and 110mm replacement ceramic ring for your pad printer. You May Also be inte...

Listing photo may not reflect the final color of the product. Please refer to the dropdown menu NOT the photo when selecting color. Marabu Tampa Gl...

Listing photo may not reflect the final color of the product. Please refer to the dropdown menu NOT the photo when selecting color. Marabu Glass In...

Use this base cabinet to support your SPC-84 pad printer and provide valuable storage space underneath.

ink knob -full assembly

Liquid adhesion promoters the pretreatment for glass in order to improve the adhesion properties between the material and the applied ink layer. Cl...

SPC 814E AC1412-SM SHOCK ABSORBER

1 Color RAPID TAG - Step Motor

82 Round Pad 40 Durometer  

RT-6 PAD / 40 DUROMETER