Skip to content
All shipments will originate from our CA and PA warehouses at this time. We apologize for any inconvenience this may cause.
All shipments will originate from our CA and PA warehouses at this time. We apologize for any inconvenience this may cause.

Prisma PVC Warm Peel Heat Transfer Vinyl - 20" Width 1 Yard

by Prisma
$7.00
SKU HT-SM-SPV33
  • actual product width can vary +/- 0.25³
  • Does not come with inner core tube.

PVC heat transfer film is a little thicker and high temperature resistant adhesive base PVC film that can hold cut-out image in place for excellent transfer. It features excellent cut and weed-ability, good flexibility and durability, showing no transformation by expansion and shrinking. It is very suitable solution for numbering, lettering and small logo or symbols, detailed designs for sports uniforms, t-shirts and other garments

  • Cotton, Polyester, Cotton/Poly Blends
  • [T-shirt, Sport jersey, Uniforms, Sweater, Jacket, Caps, etc.] PVC
  • Temperature : 284°F~ 302°F
  • Time : 8 ~ 10 seconds
  • Warm Peel
  • 510MM(W)
  • Normal Color 110 (166) micron
  • Neon Color 150 (200) micron

Make long-lasting decals for t-shirts, hats, hoodies, bags, and more with All American's Prisma Standard Heat Applied Vinyl. Cut designs out then a vinyl cutter and then heat press them onto fabric to create popular and inexpensive apparel. Prisma Standard vinyl is available in a wide variety of colors including neon and metallic. Vinyl available by the yard and half yard.

Directions

  • Cut vinyl with a GX-24 cutter using a 45 ° or 60 ° degree blade at approximately 120 pressure.
  • Apply to fabric with a heat press set at 320 °F (177 °C) for 8 - 10 seconds using medium to heavy pressure.
  • Warm peel the carrier sheet after pressing is complete.

Prisma Standard Heat Applied Vinyl Colors:

Prisma Standard Heat Applied Vinyl Colors

Care Instructions:

  • Turn the garment inside-out and wash on Gentle Cycle in lukewarm water using a mild detergent.
  • Hang or Tumble dry at temperatures lower than 175 °f (79 °C)
  • Do Not Iron directly over the vinyl transfer.
  • Do Not Dry Clean.