Use Fixture Putty to make molds for pad printing operations. Add hardener (Silica Gel) to Fixture Putty to start the chemical reaction necessary to...

200 LPI screen tint (90/10) 10% open area for the second exposure of pad print plates.

Thinner for Marabu GL Glass ink for screen printing. To regulate ink viscosity, add about 10% of GLTPV Thinner to ink and stir until homogeneous. G...

PPTPV Thinner is for use with Maraprop PP ink for thinning pad printing ink. This thinner has a fast evaporation rate. Marabu Pad Printing Auxiliar...

UKV-1 Thinner is for use with Marabu pad print and screen print inks. UKV-1 Thinner is for use with Marabu pad printing and screen printing inks. ...

SV1 Ink Retarder is used to modify the solvent evaporation rate in Marabu screen and pad print inks. SV-1 has good solubility and an evaporation ra...

SV5 Ink Retarder is used to modify the solvent evaporation rate in Marabu screen and pad print inks. Only add SV5 to ink if the drying time needs t...

SV9 Ink Retarder is used to modify the solvent evaporation rate in Marabu screen and pad print inks. SV9 has good solubility and an evaporation rat...

Safety Data Sheet for Marabu H1 Hardener ** As of Jan. 2023, the 100mL size of this hardener now comes in metal packaging. Different packaging, sam...

H2 Hardener is a fast drying ink hardener that produces a hard, brittle ink film and causes yellowing of the ink upon UV exposure. The change in co...

ABM is a matting paste for use with all 1-component Marabu screen and pad printing inks. When added, AMB will change the degree of gloss in the ink...

The Anti-static Paste AP is an ink additive that reduces ink sensitivity to electrostatic charge. Adding AP paste also thins the ink and decreases ...

A930 is a round 4"x3.5" pad and is available in 30, 40 and 50 durometers.

This M60/02P pad is 4.9"L x 3.9"W x 2.6" in dimension and is available in 30, 40, 50 and 60; 30 to 40 durometer in Superflex; and 50 durometer in D...

The AR18 is a high-quality printing pad with a wood base with straight sides suited for printing in tight spots. The pad is available in 30 thr...

Use Si-Tech Gel with Fixture Putty to create a mold for pad printing. Once the gel has been worked into the putty a mold can be made, as the putty ...

GLH Hardener is recommended for use with Marabu Glass GL Inks only. Add hardener to the ink immediately before printing: 1 part of hardener to 20 p...

Opaquing Paste OP 170 increases the opacity and broadens the spectrum when matching color shades or printing onto colored or dark substrates. OP is...

A7 is a 2.375" round silicone printing pad and is approximately 40 durometer.

The B-2 is a 3" x 1.25" rectangular silicone printing pad that has an approximate durometer of 40.

1" x 2" rectangle silicone printing pad. Approximately 40 durometer. Use the C8 small 2.1"L x 1.1"H x.4" strip pad to print in smalls, hard to reac...

The 218M is the pad of choice for several major garment manufacturers that print tagless underwear. While the 218M pad is usually available in only...

WS73 Water Wash Green plates are steel-backed, photopolymer nylon coated, water wash printing plates that are ready for etching. These plates are t...

TPX Hardener  - Liter

The ST-52 is a steel-backed, nylon-photopolymer coated, plate with a thickness of .43mm. Alcohol developed plates are superior to water wash plates...

Marabu HT Hardener is a fast drying ink hardener that produces a hard, brittle ink film and causes yellowing of the ink upon UV exposure.

GLH Hardener is recommended for use with Marabu Glass GL Inks and the MGLH Hardener is recommended for use with Marabu Glass TPGL. Add hardener to ...

Marabu H3 Hardener

Marabu H4 Hardener  Compatible with Tampa® Pol TPY Tampa® Tex TPX Tampa® Sport TPSP Tampa® Star TPR Tampa® RotaSpeed TPHF

Ink Tray for SP-814C

4" Blade Holder And 14 Blade for SP Series Ink Tray Pad Printers

4" Ink Roller for SP Series Pad Printers

SP-814CB Worktable Assembly

Marabu GLV Thinner - 1 Liter

Marabu HX Hardener Tech Info

Marabu LIGV Thinner - 1 Liter

Marabu MGLV Thinner - 1 Liter

Marabu PUV Thinner - 1 Liter

Marabu Spray Thinner 7037 - 5 Liter

Marabu QNV Unversal Thinner

Marabu PSV Thinner

This alcohol developer is to be used with ST52 and S43 printing plates.   Download MSDS Alcohol Plate Developer MSDS  

WS43 is a steel-backed, photo polymer nylon coated, water wash pad printing plate. The total thickness of the plate is .43mm. The WS-43 is easy to...

The M30-05P is a high-quality printing pad with a wood base and is available in 30 and 40 durometer and stocked in 50 - 80 durometer. This pad's ...

S43 is a steel backed, nylon-photopolymer coated, alcohol developed plate with a thickness of .43mm. Alcohol developed plates are superior to water...